Surface Finishing Engineering • Precision Consumables & Tooling

Engineering Precision Surfaces. Eliminating Component Loss.

Core Blast Solutions is an engineering-driven processor and commercial distributor of certified industrial abrasives and extreme-wear surface preparation tooling. Headquartered in Yusuf Sarai, New Delhi, we empower fabrication yards, aerospace MRO facilities, precision CNC toolrooms, and foundries across India to achieve repeatable surface finishes with absolute zero base-metal dimensional erosion ($0.000\text{ mm}$ loss), minimum shop-floor dust, and lower hourly operational expenses.

EN 10204 Type 3.1 MTCs SAE J444 / SAE J1993 MIL-PRF-9954D Sizing GSTIN: 07CRXPP7267E1ZZ
0.000 mm
Base-Metal Erosion

Preserves tight CNC tolerances and delicate mold parting lines.

≥ 80%
True Sphericity Index

Micro glass beads functioning as microscopic ball bearings.

< 10 Mins
Commercial Turnaround

Rapid volume-tiered GST quotations and commercial proformas.

100%
Iron-Free Guarantee

< 0.1% Fe₂O₃ completely eliminates bimetallic rust bloom.

// CHAPTER 01 Corporate Genesis

Bridging the Chasm Between Mechanical Contact Physics and Industrial Supply.

For decades, industrial abrasive procurement across India was treated as a low-tier commodity transaction. Workshop superintendents and purchasing officers ordered generic “sand” or unvetted “beads” from third-party trade intermediaries, resulting in severe operational bottlenecks:

✖ Scrap Glass Contamination: Crushed architectural window glass mislabeled as spherical beads, gouging aerospace alloys and fracturing into toxic airborne respirable dust.
✖ Galvanic Rust Blooming: Ferrous residues contaminating high-purity stainless steel vessels, inducing bimetallic galvanic pitting across pharmaceutical and food-grade tanks.
✖ Procurement Latency: 48-hour email quoting delays, missing Manufacturer’s Test Certificates (MTCs), and quarantined receiving bays halting active assembly schedules.

Core Blast Solutions was established in Yusuf Sarai, New Delhi, to permanently resolve these vulnerabilities. We combine rigorous materials science—Hertzian contact mechanics, XRF spectrometry chemical assays, and optical sphericity scanning—with an authenticated, direct digital distribution network.

Our Three Immutable Rules

Engineering Discipline at Every Stage

01 / SUBSTRATE INTEGRITY Zero Tolerance for Part Damage

Our media must preserve critical CNC dimensions (±0.005 mm) and delicate mold parting lines without gouging or edge rounding.

02 / SCIENTIFIC TRACEABILITY EN 10204 Type 3.1 Certified

Every consignment carries batch-specific Ro-Tap sieve analysis, chemical assays, and certified hardness reports before leaving our warehouse.

03 / ZERO PROCUREMENT FRICTION Direct Technical Engineering Desk

Direct communication with technical engineers in New Delhi—eliminating unvetted brokers, markups, and unmonitored sales inboxes.

// CHAPTER 02 Metallurgical Quality Assurance

Tested in the Laboratory. Proven on the Production Line.

Consistent surface preparation requires absolute consistency in media hardness, particle size distribution, and chemical purity. We maintain strict testing standards across all media processing runs.

XRF

Chemical Assay (ASTM C169)

X-Ray Fluorescence Spectrometry

Guarantees ≥ 70% bound SiO₂ with ≤ 0.10% total iron oxide (Fe₂O₃) and < 0.05% free crystalline silica. Ensures complete biocompatibility and zero galvanic rust bloom on surgical titanium and austenitic stainless steel.

μm

Granulometry (ASTM D1214)

Ro-Tap Sieve Distribution Audit

Mechanical 15-minute sieve shaking through calibrated woven wire meshes ensures ≥ 85% of particles fall strictly within the nominal grading window (e.g., 106–212 μm for GB-8), eliminating out-of-spec coarse gouging and pan fines.

HV

Microhardness (ASTM E384)

Vickers & Mohs Indentation Audit

Verifies 500–550 HV (5.5–6.0 Mohs) for micro glass beads, 40–50 HRC tempered martensite for SAE cast steel shots, and 2,800–3,200 HV for sintered Boron Carbide (B₄C) extreme-wear Venturi blast nozzles.

✓

EN 10204 Type 3.1 Digital Compliance

Every dispatch is accompanied by verified PDF test certificates, chemical assay data, and sieve curves before shipment departure.

Traceable Batch Hash Matching
// CHAPTER 03 Certified Industrial Catalog

Engineered Consumables & Extreme-Wear Tooling

From non-destructive satin finishing on medical implants to aggressive mill-scale stripping on marine hulls, explore our certified portfolio manufactured for repeatable surface profiles.

Flagship Specialty
🔮

Micro Soda-Lime Glass Beads

≥ 80% Roundness • Zero Metal Loss

Precision-sieved spherical micro-spheres acting as miniature ball bearings. Delivers glare-free architectural satin finishes and controlled micro-peening with absolute zero base-metal loss (0.000 mm). Chemically inert with < 0.1% Fe₂O₃, eliminating bimetallic rust bloom on stainless steel and aluminum.

Grades: GB-0 to GB-13 25–30 Cycles
⚙️

High-Carbon Cast Steel Shots

SAE J444 / J827 • 40–50 HRC

Fully tempered martensitic steel spheres engineered for fatigue life enhancement, structural shot peening, surface hardening, and high-durability foundry casting descaling. Delivers high kinetic energy absorption across 500+ recirculating cycles in centrifugal wheel-blast systems.

Sizes: S-110 to S-780 500+ Passes
⚡

Angular Cast Steel Grit

SAE J1993 • GP, GL & GH Grades

Razor-sharp angular cutting media engineered for rapid mill-scale stripping and deep mechanical anchor profiling (R_z > 50–100 μm). Available in GP (40–50 HRC), GL (53–60 HRC), and maximum-hardness GH (64–68 HRC) for high-build marine epoxy and polyurea primers.

Grades: G-14 to G-120 Sa 2.5 / Sa 3 Clean
💎

Virgin Fused Aluminium Oxide

99%+ Pure White • Brown Alumina

100% iron-free virgin White Alumina engineered for titanium dental implants, orthopedic screws, and aerospace alloys where ferrous cross-contamination is strictly barred. Tough Brown Alumina stocked for heavy surface profiling, weld cleanup, and thermal spray bond coat prep.

Mesh: F-16 to F-240 9.0 Mohs (~2000 HV)
🛡️

Plastic Media Abrasives

MIL-P-85891A • Types II, III & V

Engineered for non-destructive dry paint stripping from aircraft composite skins, delicate automotive restorations, and electronic switchgear deflashing. Strips tough multi-layer coatings at 20–40 PSI without scratching aluminum airframes or rounding sharp mold parting lines.

Types: Urea, Melamine, Acrylic 3.0–4.0 Mohs
🎯

Venturi Blast Nozzles & PPE

Boron Carbide (B₄C) • TC • Helmets

Long-venturi sintered Boron Carbide nozzles delivering 2,800–3,200 HV microhardness and up to 10× longer wear life over Tungsten Carbide when blasting aluminum oxide. Complete line of positive-pressure air-fed sandblasting helmets and heavy-duty operator blast suits.

Bores: No. 3 to No. 8 Lowest TCO/Hour
Full Product Specifications

Looking for Complete Mesh Sizing & Material Data Sheets?

Access our full certified product catalog of Micro Soda-Lime Glass Beads (GB-0 to GB-13), SAE Cast Steel Shots, Angular Steel Grit, virgin alumina, and Boron Carbide blast tooling.

// CHAPTER 04 Industrial Footprint

Powering High-Tolerance Engineering Across India

Our certified consumables are specified by production superintendents, quality managers, and toolroom heads across mission-critical manufacturing domains:

✈️

Aerospace & Turbines (MRO)

Non-destructive descaling and micro-peening of titanium and Inconel turbine aerofoils to arrest stress-corrosion cracking without altering aerofoil dimensions.

🩺

Medical Implants & Surgical

Iron-free matte texturing of orthopedic screws, hip joints, and dental abutments, along with glare elimination on stainless surgical tools for operating rooms.

🏭

Tool, Die & Mold Maintenance

Rapid removal of baked-on thermoplastic flash, rubber vulcanization residue, and release agents from injection mold cavities without dulling parting lines.

🚢

Marine & Structural Steel

High-speed descaling to ISO Sa 2.5/Sa 3 with precise mechanical anchor profiles (R_z > 75 μm) for protective offshore epoxy primers and tank linings.

Official Digital Channels

Verified Brand & Engineering Footprint

Follow Core Blast Solutions for surface finishing whitepapers & media demonstrations.

Official Corporate Identification

Commercial Nexus & Engineering Desks

Central corporate headquarters and registered administrative hub. Orders and inquiries are processed digitally for immediate turnaround.

Corporate Office New Delhi Nexus

400-A, 4th Floor, 12, Ajit Singh Bhawan, Yusuf Sarai Commercial Complex, New Delhi – 110016, India.

Tax & Legal Audit GSTIN Registered

GSTIN: 07CRXPP7267E1ZZ
HSN: 7018, 7205, 2818, 8424

Technical Calling Desks Engineering Support
Commercial Correspondence Invoicing & Orders
Ready to discuss sizing specifications, MTC compliance, or freight schedules? Connect on Verified WhatsApp
Scroll to Top